請問有巡跡系統的十字R1
PC5快排是否有兩款
一種是反打一種正打？？
有裝過的大大麻煩幫個忙……
PC5快排是否有兩款
一種是反打一種正打？？
有裝過的大大麻煩幫個忙……
|
請問PC5快排是否有兩款
沒錯, 機械式的快排開關都是分兩種, 正打跟反打. 沒有侷限在PC5, 甚麼電腦系統都依樣.
但是如果是電子壓力式的就沒有了, 大部分都有個小控制器可以調整.
但是如果是電子壓力式的就沒有了, 大部分都有個小控制器可以調整.
| tysonlin 寫到: |
| 沒錯, 機械式的快排開關都是分兩種, 正打跟反打. 沒有侷限在PC5, 甚麼電腦系統都依樣.
但是如果是電子壓力式的就沒有了, 大部分都有個小控制器可以調整. |
感謝大大
PCV現在有出一顆正反打通用的快排感應器
不知道能不能適用所有車種
料號是4-127
不知道能不能適用所有車種
料號是4-127
如果4-127 也是機械式接點的話, 線組又是三線的話, 看起來是可以的. 只要跳腺接到你要push或是pull的那一根就可以了.
Power Commander Quick Shift Dual Contact Sensor PCV PUSH or PULL Shift Rod Sensor
This new sensor from Dynojet works in either the PUSH or PULL direction. Can be used to replace our standard one direction sensors if desired. Works great for third party systems where clutch-less upshifts AND downshifts are needed.
Part numbers 4-113 (PULL) and 4-114 (PUSH) are still available.
4-127 comes with a different sub-harness than these sensors so it will NOT directly plug into the 4-124 or 4-126.
Power Commander Quick Shift Dual Contact Sensor PCV PUSH or PULL Shift Rod Sensor
This new sensor from Dynojet works in either the PUSH or PULL direction. Can be used to replace our standard one direction sensors if desired. Works great for third party systems where clutch-less upshifts AND downshifts are needed.
Part numbers 4-113 (PULL) and 4-114 (PUSH) are still available.
4-127 comes with a different sub-harness than these sensors so it will NOT directly plug into the 4-124 or 4-126.
| tysonlin 寫到: |
| 如果4-127 也是機械式接點的話, 線組又是三線的話, 看起來是可以的. 只要跳腺接到你要push或是pull的那一根就可以了.
Power Commander Quick Shift Dual Contact Sensor PCV PUSH or PULL Shift Rod Sensor This new sensor from Dynojet works in either the PUSH or PULL direction. Can be used to replace our standard one direction sensors if desired. Works great for third party systems where clutch-less upshifts AND downshifts are needed. Part numbers 4-113 (PULL) and 4-114 (PUSH) are still available. 4-127 comes with a different sub-harness than these sensors so it will NOT directly plug into the 4-124 or 4-126. |
看說明4-127是用來取代4-113跟4-114
應該是可以用
我買一顆來試試看好了
This new sensor from Dynojet works in either the PUSH or PULL direction. Can be used to replace our standard one direction sensors if desired. Works great for third party systems where clutch-less upshifts AND downshifts are needed.
一顆美金289好貴啊...我都買這家的 , 一顆美金140.
http://www.danosperformance.com/quick_shifter_switch.htm
FTecu也是跟他買, 然後兩顆串起來.
http://www.danosperformance.com/quick_shifter_switch.htm
FTecu也是跟他買, 然後兩顆串起來.
| tysonlin 寫到: |
| 一顆美金289好貴啊...我都買這家的 , 一顆美金140.
http://www.danosperformance.com/quick_shifter_switch.htm FTecu也是跟他買, 然後兩顆串起來. http://motophoto.tw/up/up/016/04c/1604121145300.jpg |
台生哥 請問
這顆感應器可用在PCV上?
還是獨立的?
4-127最便宜只看到243元
還是好貴
可以的, 這顆品質很好. 買的時候跟他說你要裝在Power Commander的, 他會連插頭一起做好給你. 不過我不知道PC3跟PC5有沒有一樣.